background image

1 // TRI-AXIS (3D MOTION) PEDOMETER BY OZERI™ 

       

Congratulations on your purchase of the 4x3motion Pedometer, by Ozeri. This pedometer is a great 
exercise tool that tracks the total number of steps you take and the total time you spend walking, 
along with the distance you walk and calories you burn. This pedometer’s motion sensor is optimized 
to detect steps while walking. The data is tracked daily and the daily memory is automatically reset 
at midnight. Even though daily memory is reset at midnight, this pedometer will still add each day’s 
data to the total memory, accumulating data for up to 7 days.

This pedometer uses a Lithium battery (CR2032 installed). It automatically powers off after 30 
seconds of inactivity to preserve battery life. To change the battery all you will need a standard mini-
screwdriver, similar to the type used on eye glasses.

When setting up your pedometer for the first time, you will need to enter your walking stride [the 
distance between your steps]. To measure your stride, it is recommended that you calculate an 
average in the following way: Walk 10 steps notating your starting position and ending position. 

Measure the distance between your starting and ending position. Divide this total distance by 10 to 

get your average stride. For example, if the total distance you walked over 10 steps is 330 inches, your 
average stride would be 33 inches (or 2 feet 9 inches). 

Note:

 To ensure accuracy, this pedometer will 

not begin counting steps until it detects motion resembling approximately 13 continuous steps. This 
pedometer may not accurately count steps in the following conditions:

•   When the unit moves irregularly. This can occur when the pedometer is changing its orientation, 

such as when loose in a purse or bag, or if hanging from a belt. 

•   When walking at an inconsistent pace. This can occur when wearing shuffles or sandals, or when 

you are constantly stopping such as in a crowded place.

•   During Up and Down movement. This can occur when exercising in ways other than walking, or 

when ascending or descending on a steep staircase.

•   When placed in close proximity to a cell phone.

Note:

 It is recommended that the pedometer be set in your desired unit of measurement before 

first use. To change the unit of measurement, press and hold MODE for 5 seconds to switch from 
the Metric units [KM/H] to the Imperial units [MILE/HOUR]. Changing the unit of measurement will 

erase all stored data.

2 // WARNINGS   

 

 

 

 

       

PLEASE READ FIRST AND KEEP THIS MANUAL FOR FUTURE USE

•   This  pedometer  is  not  a  toy.  Keep  this  pedometer  away  from  children.  The  pedometer  contains 

small pieces that can be swallowed. The pedometer’s lanyard can cause strangulation.

•   Always contact your healthcare provider before undertaking a weight loss or exercise regimen.
•   Operate this unit only as intended. 
•   Do not swing the pedometer by the lanyard. Doing so may cause injury.
•   Be careful when placing the pedometer in your shorts or trousers not to sit on it while it is still in 

your pocket. This may damage the pedometer.

•   When replacing the batteries, please ensure that the batteries are correctly aligned by polarity (+/-).
•   It  is  recommended  that  the  battery  be  removed  if  this  device  will  not  be  used  for  an  extended 

period of time.

•   Do not dispose of battery in a fire. This may cause an explosion. Dispose of battery at your local 

recycling center to avoid pollution and unlawful disposal.

•   Do not expose this product to rain or extreme conditions.
•   Do not attempt to disassemble this product. It has no serviceable parts. 
•   This product is battery operated. Improper use of this product may cause battery to leak or explode, 

which  may  cause  personal  injury.  If  contact  is  made  with  a  leaking  battery,  immediately  flush 
affected area with running water and contact your local poison control center or seek medical 
attention. You may also call the National Button Battery Hotline at 202 625-3333.

 

 

 

 

 

                          

       

3 // PROGRAMMING THE PEDOMETER 

 

 

       

To program the pedometer with your personal data (weight and stride) and to set the calendar, first 
switch  to  the  CALENDAR  screen  (from  the  TODAY  STEP  screen,  press  SET  3  times  to  get  to  the 

CALENDAR screen). From the CALENDAR screen press and hold SET for 2 seconds. This will switch 
the pedometer into SETUP mode. The following is the sequence of screens to program:

Weight  >  Stride  >  Year  >  Month  >  Day  >  Hour  >  Min  >  12/24 Hour

Start  by  entering  your  WEIGHT  (indicated  by  “W”),  followed  by  your  STRIDE  (indicated  by  “S”), 
followed by the CALENDAR date and time functions. Use the  

 buttons to make adjustments. 

When finished, press SET briefly.

After  all  screens  have  been  programmed,  the  pedometer  will  exit  SETUP  mode  and  the  LCD  will 
switch to TODAY mode.

The following are the data ranges for the main

programmable functions:

•   Weight range: 20~150kg/40~350lb
•   Stride range: 30~120cm/10~50in
•   Year range: 2000~2099

4 // MAIN BUTTON FUNCTIONS 

 

 

        

        

• 

MODE key:

  Scrolls  through  the  pedometer’s  various  modes  (STEPS  /  KCAL  /  DISTANCE  /  TIME 

EXERCISED  /AVERAGE  SPEED).    Please  note  that  the  MODE  key  is  disabled  when  the  LCD  is 

displaying the CALENDAR). 

Note:

 It is recommended that the pedometer be set in your desired 

unit of measurement before first use. To change the unit of measurement, press and hold MODE for 
5 seconds to switch from the Metric units [KM/H] to the Imperial units [MILE/H]. Changing the unit 

of measurement will erase all stored data.

• 

SET key:

  Press  SET  KEY  to  scroll  between  TOTAL  STEPS  /  SPLIT  STEPS  /  CALENDAR  MODE  / 

TODAY’S STEPS. In TODAY MODE (TODAY’S STEPS), press and hold SET KEY for 2 seconds to turn 
on EL Blue Back light (light will last 8 seconds) In SPLIT MODE press and hold SET KEY 2 seconds 

to erase the SPLIT memory. 

Note:

 the data stored TOTAL and TODAY modes will not be erased. In 

CALENADR MODE press and hold SET 2 second to enter SETUP mode.

• 

UP / DOWN keys:

  In  TODAY  MODE  press   

  to  display  the  last  7  days  of  STEP  memory. 

The date on the bottom right window of LCD will scroll through 7 days of history. In SPLIT MODE 

press  

 to change the Interval from 1, 2, or 3. In SPLIT mode the intervals can be reset to count 

the number of steps at a given time. This can be helpful for counting the steps for an event or for 
determining the number of steps taken between any 2 points.

 

 

 

 

 

                          

       

USER MANUAL

Unfold booklet

completely to use.

Reviews:

Related manuals for TRI-AXIS