Do not use this fan next to a window or anywhere where exposure to
rain or moisture is possible. This may create an electrical hazard.
Do not place the electrical cord under any objects, such as carpets,
throw rugs or runners. Do not place electrical cord in areas of foot
The fan must always be unplugged when not in use. Before
Do not operate the fan in an area where gasoline, paint supplies or any
Do not try to repair or disassemble this fan. Doing so will void the
warranty and may result in damage and/or personal injury. There
are no end-user serviceable parts.
This fan is not suitable for use in agricultural facilities and hazardous
locations. This fan does not meet the requirements of NEC Article 547-
7 and 500 (2002).
Keep this fan and all electrical appliances out of reach of children at
all times.
3
THIS FAN HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE
OTHER). TO REDUCE THE RISK OF ELECTRICAL SHOCK, THIS PLUG IS
INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. MATCH
THE WIDE BLADE OF PLUG TO THE WIDE SLOT OF THE OUTLET. FULLY
INSERT. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
DO NOT ATTEMPT TO BYPASS THIS SAFETY FEATURE.
NOTE: THIS FAN IS EQUIPPED WITH A FUSE. ALWAYS UNPLUG
THE FAN BEFORE REPLACING FUSES. IF THIS FAN LOSES POWER
AND YOU SUSPECT THE FUSE IN THE PLUG HAS BLOWN, UNPLUG
THE FAN, THEN SLIDE THE FUSE DOOR FOUND ON THE SIDE
OF THE PLUG TO THE OPEN POSITION. SLIDE THE FUSE DOOR
OUTWARD UNTIL THE BLOWN FUSE IS FULLY VISIBLE. REMOVE
THE BLOWN FUSE AND SNAP THE REPLACEMENT FUSE INTO
PLACE. FULLY CLOSE THE FUSE DOOR. ONLY REPLACE WITH A
FUSE RATED AT 2.5 AMPS, 125 VOLTS.
