Ozeanos OT-FH-2000T, Instruction Manual, Page: 17 / 21

※
The above procedure can also be carried out on the radiator control panel using the
same procedure as described in the previous diagram.
Note: OT-FH-2000T with automatic erase screen function under the heater, in progress. The
control panel is automatically cleared if not operated for 3 minutes.
Proper Use of the Remote Control
1.
When using the remote control, make sure that the head on the front of the remote
control is aligned with the recording window on the fan body.
2.
The remote control can be approximately 5 m from the front of the radiator; it can
normally be operated if the deviation is within 30 degrees.
3.
Avoid direct sunlight on the receiver window to avoid affecting the receiver's
performance.
4.
If the remote control will not be used for an extended period of time, remove the
battery and store it properly.
5.
When using the remote control, insert the battery. The remote control is powered by
a lithium battery.
Insert the battery:
a. Open the battery cover.
b. Insert a new battery, taking care to observe the polarity of the battery (+ and -).
c. Close the battery cover.