QUICK SETTING TABLE
SEEDING DISC
• Ø6.5 mm holes diameter
• Round mixers
• Preferably 36 holes
We recommend, to set your machine to the following values for Chickpea seeds.
CHICKPEA SEEDS (Big Size 9-10-11 mm)
OVERFLOW PLATES
C1 plate must be removed.
Only C3 plate must be attached.
Note; 1.Seeding hopper must not carry too much seeds.
2. Machine must not be used without these plates.
Otherwise, seeds will stuck in hopper and will damage
the nail mixers on the disc.
SELECTORS (SINGULATORS)
A SELECTOR SETTING
Outer selector handle should be fixed to
hole no. “14”
B SELECTOR SETTING
Inner selector handle should be
fixed to hole no. “9”
58
