V2.00 - Installation Instructions, Specifications and Project Plans are effective 10/17/2017 . This information is updated periodically
and should not be relied upon after 2 years from 10/17/2017 . Please visit OZCOBP.com to get current information.
step 5
repeat steps 2-4
on adjacent side
step 4
remove pieces
step 3
multiple cuts approximately
1/4" apart to mark
step 2
set saw cut depth;
start cuts 1/4" from top
5
Dado cut
pencil
step 1
mark ledge locations
mark
beam
width
Summary of Contents for 210M
Page 2: ......