Step 1: Verify package contents
Tent : 1 each
Step 4: Secure poles
1) With a person holding each end of the front pole (B), flex the pole into an arch. Carefully
place the ends into the fast feet located at the stake loops.
2) Repeat this step for the remaining poles (A).
Step 5: Stake front of tent
1) Stake the tent at each side by the front
door by inserting a stake through the
stake loops.
2) Make certain the tent floor is pulled out
evenly and tightly.
3) Hammer the stakes into the ground at a
45
0
angle using a hammer or mallet.
Step 3: Spread tent, insert poles
1) Spread out the tent flat, floor side down.
2)
Use the illustration below as guide. Insert
the longest pole (B) through the sleeve on
the roof near the front door.
3)
Insert the shorter poles (A) through the
remaining sleeves.
Step 2: Assemble poles
1) Assemble the tent poles by placing
fiberglass sections into the metal ferrules.
Five poles are provided:
1 each (B) Front pole (Gray)
4 each (A)
Leg & Roof
pole (Black)
Rainfly : 1 each
Tent Stakes : 30 each
WT191812
OZARK TRAIL
ASSEMBLY INSTRUCTIONS
WT191812 09/18
Fiberglass Poles : 5 each (total)
( ) denotes color coding
(A) Leg & Roof (Black) - 4 each
(B) Front (Gray) - 1 each
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsites, free
of debris and sharp objects, away from any
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of the tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam-seal the inside stitched seams of the tent.
This will improve weather resistance. Available
in sporting goods departments. Discolouration
may occur if applied to outside seams.
Sun Valley
(A)
(B)
(A)
(A)
(A)
(A)
(B)
(A)
(A)
(A)
Rope Light : 4 each
(batteries not included)
