background image

Sewing

 her

e

MODEL# WF-4486 LIGHTED SHOWER TENT

4ft x 4ft x 86in/1.22m x 1.22m x 2.18m

 

Review your parts list above to make sure all parts listed above have included in your package.

Call our toll free number:1-877-579-1550 Monday-Friday 8:30 am - 5:30 pm EST

FABRIC BODY:

STAKES:

1

4

1

4

Tent Body

Steel, chain-corded Leg Pole 

N/A

1

Tent Fly 

N/A

LPOL-244BK

Carry Bag

Steel stake 

STS-180

Select a smooth level site to spread out the tent and extend 
all the poles.
Remove the fabric pocket 

on

 the connector; insert the 4 

leg poles 

through

 the pole sleeves and into the

 pre-

attached

 center 

hub

. Make sure the metal springs

 lock into 

place 

on

 the 

plastic hub

.

STEP 2: Set Up the Tent

ASSEMBLY INSTRUCTIONS

To raise the shower tent, place the bottom of the leg poles onto 
the pins attached to the stake loop along the perimeter of the 
tent; and clip the pole hooks along the walls to the frame.

C

Pull out the tent floor evenly and tightly

.  It should be flat 

on the ground.

 

 H

ammer the stakes into the ground at a 

45 degree angle.

STEP 3:

Attach the accessories (gear loft, storage pocket, and organizer) 
to the loops inside the tent with hooks, and put the remote 
controlled LED light into the gear loft.

  The tent can support a 

 

five gallon shower bag.

A

               Add Accessories

DISASSEMBLY INSTRUCTIONS

STEP 2: Take Down the Tent
A
B
C

E

Take down all the accessories, LED light, gear loft, pockets etc.

 

Detach the 

f

ly from the tent.

Remove the leg poles from the pin-rings, undo hooks securing 
leg poles, and disengage the poles from the 

hub

. Take down 

the tent body from the poles.
Fold the poles and store them into the pole bag. 
P

ut the protective fabric pocket on

 the 

hub.

 Fold

 the

 tent into 

rectangular shape

 equal to

 the width of pole bag. Place

 the

 

organizer

s and mud mat

 on tent body. Lay pole bag at one end 

of tent and roll tightly together, then pack into the carry bag.

D

Attach the fly to the shower tent by 

attaching

 the plastic S-

hooks at the fly corners to the 

D-

rings on the leg poles, and 

fasten the 

hook-and-loop tabs

 sewn on the fly around the leg 

poles.

E

1

4 way hub – for tent roof

4WAY-RF

HUB:

D

Reviews: