Ozark Trail Grand Gazebo WT191515SH Owner'S Manual Download Page 3

Step 7: Stake screen house

Step 6: Connect leg sections, attach deck 
                feet, attach S-hooks

Step 5: Position and fasten the screen house

1) Place the screen house body over the roof 
     frame positioning screen house corners 
     over the corner connectors. Position logo 
     over middle roof pole.
2) From the underside of the screen house, 
     fasten ties to the frame. 
       
     

1) Secure screen house using all guy lines and
     stakes.

1) On one side of the screen house connect
     the bottom section of the leg poles and 
     attach deck feet. This will raise the 
     screen house.
2) Repeat the process for the remaining legs
     on the opposite side of the screen house.
3) Bring the side walls of the screen house
     down.  All openings should be zipped.
4) Attach the S-hooks along the bottom 
     perimeter of the screen house to the 
     deck feet.

Packing the screen house

1) Spread screen house flat, distribute evenly.
2) Fold into quarters not to exceed the length
     of pole bag.   

3) Lay pole bag at opposite end from door.
     Tightly roll bag, skin and fly forcing air
     through unzipped door.  

4) Secure with ties and place in carry bag with
     stakes and accessories.
5) Screen house must be clean and dry before
     storage. Do not store on concrete floor.  

Be certain campfires are extinguished.

Dispose of garbage appropriately. 

Dimension A should
be close to but not
exceed the length
of the pole bag.

A

Fold tent into a
rectangular shape.

Front of tent
(door unzipped)

Disassembly

1) To take down the screen house, disassemble
     in reverse order.
2) Remove accessories.
3) Be sure to leave doors unzipped to avoid
     zipper damage.
4) Remove stakes with hammers or stake
     puller. DO NOT pull on screen house.
5) Keep poles and stakes together in bags
     provided.  

Step 8: Secure guy lines

1) Position poles so the perimeter of the screen 
      house is taut but remains on the sod. Make 
     certain the perimeter is even and squared.
2) Stake down the screen house by inserting a 
     stake through the fabric stake loops and 
     metal grommets, located along the 
     perimeter of the screen house.
3) Hammer the stakes into the ground at a  

      45° 

angle using a hammer or mallet.

Screen house must be secured for proper function. 

Step 9: Attach Lights

1) Insert battery pack (batteries not included)
     into pocket along the eave and close 
     the flap.  
2) Thread the light rope through the yellow
      loops along the eaves.  Secure the end 
      of the rope to the clip.
 

Step 10: Attach Video Screen

1) Unfold the video screen.
2) Locate (white) loops at side opposite 
    from lights.  Attach S-hooks at the top and 
    bottom of the video screen to the loops at 
    the eave and near the base of the screen 
    house.

WT191515SH    09/18

Summary of Contents for Grand Gazebo WT191515SH

Page 1: ...kes flash floods strong winds and other hazards which may cause harm to this product or its occupants Have a minimum of two adults for assembly During assembly poles are under tension If not held firmly in place during assembly poles could break or flip up possibly causing serious injury Safety glasses may be worn throughout the assembly process as an additional precaution Exercise care when using...

Page 2: ...house WT191515SH ASSEMBLY INSTRUCTIONS Tent Stakes 32 each total Hanging Shelf 2 each Video Screen 1 each Rope Lights 3 each batteries not included Step 2 Assemble poles 1 Assemble steel poles by inserting the tapered ends into the adjacent sections Organize frame poles by color and length IMPORTANT NOTES Assemble your screen house before camping to become familiar with the assembly Two people are...

Page 3: ...certain campfires are extinguished Dispose of garbage appropriately Dimension A should be close to but not exceed the length of the pole bag A Fold tent into a rectangular shape Front of tent door unzipped Disassembly 1 To take down the screen house disassemble in reverse order 2 Remove accessories 3 Be sure to leave doors unzipped to avoid zipper damage 4 Remove stakes with hammers or stake pulle...

Page 4: ...le to screen houses Apply a generous amount of seam sealer on inside seams Seam sealer may be purchased at any local sporting goods store To avoid mildew store tent screen house ONLY when thoroughly dry However if mildew occurs use a soft bristle brush or sponge with mild dishwashing soap or Fels Naptha soap to clean Let dry thoroughly and a tent approved water repellent compound may be applied Fo...

Reviews: