#
√
3. If you want to delete the registration, you can press beneath
.
The display
will show
"
?"
, press beneath
√
to confirm. Press beneath to return to the
main interface.
Notes:
1. The registration of door camera can be up to 60 seconds.
2. The registration of indoor handset can be up to 20 seconds.
3. The product can support max. 2 door cameras and 2 indoor handsets.
Power Saving Mode
-17-
1. If the door camera is battery-powered, the indoor handset cannot enable
monitoring function with factory default. Press register button for 3 seconds and
make the door camera enter the registration status. Press register button again for
3 seconds. The door camera will give “bi-bi-bi” tone and switch from power saving
mode into power consumption mode. Then the monitoring function is available for
the indoor handset.
2. In registration status, press register button for 3 seconds. The door camera will
beep and switch from power consumption mode into power saving mode. In this
case, the monitoring function is unavailable.
3. Function Details of Device in Different Power Supply Modes
:
Power By
PSU
BAT consumption mode(High)
BAT consumption mode(Low)
Monitoring
PIR
ON
ON
OFF
ON
OFF
OFF
Summary of Contents for SFW-001-E
Page 2: ......
