O sensor de ambiente e o cabo de alimentação ligam-se na parte de trás do equipamento até à lateral direita
ou esquerda da estufa.
O sensor deverá ficar retirado da estufa a uma distância de pelo menos 1 metro, e a pelo menos 1,20cm do
chão, para que possa obter resultados reais de temperatura ambiente.
Figura 8
5.
LIMPEZA E MANUTENÇÃO
Para um bom funcionamento do seu equipamento é imprescindível realizar as operações de limpeza e
manutenção abaixo indicadas, com a periodicidade referida. Sempre com o equipamento frio.
A deterioração de peças do equipamento por falta de limpeza leva à perda da garantia de dois anos oferecida
por
OZ Energia
(veja-se o capitulo de garantia).
LIMPEZA DIÁRIA EM FRIO
5.1.
Permutador de calor
Puxar as varetas de limpeza; é conveniente fazê-lo com a porta de vidro fechada para conseguir que a cinza
caia dentro do equipamento. Isto deve ser feito
todos os dias
e com o equipamento frio.
Figura 9
Semanalmente, deverá ser realizada uma limpeza mais profunda ao permutador de calor (
), nos modelos
LXS e VXS. Para ter um melhor acesso ao permutador e poder limpá-lo de forma exaustiva, deve-se empurrar
para cima a placa superior da grade (
), até desencaixar as patilhas que a fixam à placa central e retirá-la. Ao
finalizar, coloca-se de novo a placa superior, assegurando que as patilhas ficam correctamente encaixadas.
Teclado
Suporte do teclado
Base de ligação de antena Wi-fi
Ligação de corrente ~230/240V - 50Hz
Ligação do termóstato
Termóstato
9