RED
BLACK
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
CONNECTION
IN
VEHICLE
(
POSITIVELY
EARTHED
)
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
RED
BLACK
CONNECTION
IN
VEHICLE
(
NEGATIVELY
EARTHED
)
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
Model: OC-61201
6/12 Volt
1 Amp
CHANGE SWITCH TO CORRECT
VOLTAGE ON SIDE BEFORE USE
MICROPROCESSOR CONTROLLED
BATTERY CHARGER & MAINTAINER
www.ozcharge.com.au
4 • Oz Charge manual
www.ozcharge.com.au
CHARGING INSTRUCTIONS:
STEP 1 - Pre charge check & electrolyte level check
•
Check the Battery Electrolyte levels (Not required on sealed & maintenance free
batteries).
If necessary, remove the vent caps and add distilled water so the levels are halfway
between the upper and lower fill lines.
•
Check the battery voltage, type and Ah capacity to ensure the charger is compatible.
•
Ensure the battery is in a well ventilated area and the charger should be as far away
from the battery as the cables permit.
STEP 2 - Connecting the battery charger to your battery
If the Battery is out of the vehicle:
Connect the Red (+) Crocodile clip or ring
terminal to the positive (+) battery terminal.
Connect the Black (-) Crocodile clip or ring
terminal to the negative (-) battery terminal.
If the battery is still in the vehicle, determine if the vehicle is positively or negatively
earthed.
If Negatively Earthed (Most Common)
FIRST Connect the Red (+) Crocodile
clip or ring terminal lead to the positive
(+) battery terminal and then connect
the Black (-) Crocodile clip or ring terminal
lead to the vehicle’s chassis.
DO NOT connect the Black (-) lead
to the carburettor or fuel lines.
If Positively Earthed
FIRST Connect the Black (-) Crocodile clip
or ring terminal lead to the negative (-)
battery terminal and then connect the Red
(+) Crocodile clip or ring terminal lead to
the vehicle’s chassis.
DO NOT connect the Red (+) lead to the
carburettor or fuel lines.
