Page 3
Manual Version: v1.0
Model Code: 3226
Oypla.com LLP / www.oypla.com
Parts List:
-
If you are missing any of the below parts, please contact
-
Please be aware that you will be referring to this parts list throughout the assembly
process
-
Please refer to the diagram below for instructions on how to operate your product.
1
Behind Cover
2
Switch
3
Nut
4
Output tie-in
5
Base
Contents
1
Front Cover
-
2
Safety
Instructions
-
2
Warning
Instructions
-
3
Operating
Instructions
-
5
Cleaning and
Maintenance
-
6
Problem-Cause-
Solution
-
6
Back Cover
Operating Instructions
5
2
3
4
1
• Your submersible pump is
designated for the circulation of
water with maximum temperature
of 35°C.
• This pump may not be used for
other fluids, especially motor fuels,
cleaning fluids, and other chemical
products!
INSTALLATION INSTRUCTIONS
The submersible motor pump is installed as either of the following:
-
In a stationary position with a fixed pipeline.
-
In a stationary position with a flexible hose pipe.
PLEASE NOTE: You should never install the pump by suspending it
unsupported from its delivery pipe or power cable. The submersible
motor pump must be suspended from the specially provided handle
or be placed on the bottom of the shaft. To guarantee that the pump
works properly, the bottom of the shaft must be kept free of sludge
and dirt of all kinds.
