USER MANUAL BALLOON PUMP
Model No: 4002
SAFETY INSTRUCTIONS
(Please keep these instructions)
Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
The product should only be connected to a 230 V AC, 50 Hz
electrical outlet.
Never leave the product unattended whilst it is switched on.
If you have to leave the product unattended, even for a short
while, always switch it off.
Keep the product
out of children’s reach and do not allow
children to use it.
Inspect the mains lead regularly. Never use the product if the
mains lead or plug has been damaged in any way.
Do not place the mains lead on or near any hot surface.
Never move the product by pulling on the lead.
Do not store or use the pump in wet conditions.
Keep the inflation port free from blockage and keep them
ventilated at all times.
Never allow sand, stones, etc. to be sucked into the inflation
port when using the pump.
Never look inside or point the inflation port towards your
eyes when the pump is working.
Never allow sand, stones, etc. to be sucked into the inflation
port when using the pump.
Never attempt to put hands or fingers into the inflation port
at any time.
Do not use the pump continuously for more than 2 hours,
otherwise the pump may overheat.
WARNING
To Reduce The Risk of Fire or Electric Shock,
follow these basic precautions:
Read all instructions before using the balloon pump.
Never allow children to operate or play with the balloon pump.
Never leave pump unattended when not in use.
-Save these instructions-