USER MANUAL Model No: 4018, 4019
Assembly Instructions
Parts List:
If you are missing any of the below parts please contact
Please be aware that you will be referring to this parts list throughout the assembly
process.
a. Freestanding Method
Follow these steps if you wish to attach the feet supplied with the appliance, to use in a
freestanding manner.
1. Turn the panel heater upside down.
2. Align the feet with the mounting holes on the
bottom of the panel heater.
3. Using the screws provided, attach the feet
onto the bottom of the panel heater,
being careful
not to overtighten as this can cause damage to the
product.
b. Wall-Mounted Method
Follow these steps if you wish to attach the product to a wall or surface.
Please note that this product
must be installed at least 15cm from the floor, and 50cm from the ceiling.
1. Plan where you want to mount the heater,
using a pencil to mark the two hole locations.
Ensure that the holes are level for the best mount. The
holes should be 550mm apart.
2. Proceed to drill the two holes.
Be aware that the
holes need to have a diameter of 8mm and be 40mm deep
to accommodate the anchors properly.
3. Insert the supplied anchors into the holes,
using a screwdriver to tighten them. Screws
must protrude 6mm from the anchor head.
4. Mount the product by hanging the hook holes
onto the protruding screws.
