Operating Instructions
USER MANUAL Model No: 3991
Product Details
Assembly
Free Standing
Before using the heater, the feet must be attached to the unit.
These are to be attached to the base using the 4 screw provided.
Wall Mounted
The unit must be mounted so that the flow of hot air is not blocked
or hindered. The heater itself will become hot, therefore be aware
of the minimum distances stated in the diagram.
1.
Remove the mounting bracket (1) from the heater by
unscrewing the mounting bracket screws (2).
2.
Drill holes in the
wall and fix the
bracket to the wall
tightly. Make sure
the bracket is
vertically positioned
so that the heater is
not tilted.
3.
Attach the heater to
the mounting
bracket by hanging
it onto the bracket.
Once in place,
secure it with the
bracket screws (2).
Operating Instructions
1.
Turn the rotary knob (5) clockwise as far as it will go.
2.
Wait until the heater has warmed up the room to the desired temperature
and then turn the knob back slowly until the control lamp (4) goes out.
3.
The thermostat is now set at the current temperature and will turn ON when
the temperature drops below this point, or OFF when above.
Care and Maintenance
•
Before cleaning the heater, disconnect the plug from the power supply
and allow it to cool down fully.
•
Clean the casing with a damp cloth. Do not use any strong or abrasive
cleaning materials and do not allow water to reach any internal parts.
•
Do not immerse the heater in water or any other liquid.
Disposal of Unit
Products bearing the symbol shown above means that used
electrical and electronic equipment (WEEE) should not be
mixed with general household waste. For proper treatment,
recovery and recycling, please take this product(s) to
designated collection points where it will be accepted free of
charge. Disposing of this product correctly will help save
valuable resources and prevent any potential negative
effects on human health and the environment, which could
otherwise arise from inappropriate waste handling. Please
contact your local authority for further details of your nearest
designated collection point. Penalties may be applicable for
incorrect disposal of this waste, in accordance with your
national legislation. +
Imported into EU by Oypla.com LLP, Uxbridge, UB8 2FX
