Page
3
Manual Version:
v1.0
Model Code:
3940
Oypla.com LLP
/ www.oypla.com
Parts List:
If you are missing any of the below parts, please contact
Please be aware that you will be referring to this parts list throughout the assembly process.
The fixing bracket should be mounted according to the heater
length, at a distance to adequately support the tubular heater.
Screw the two bottom halves of the bracket to the wall, place
the tubular heater on brackets, and then fasten top brackets
over the tub.
Before connecting the heater, check that the supply voltage is
the same as that is stated on the rating label.
Contents
1
Front Cover
-
2
Safety
Instructions
-
3
Assembly
Instructions
-
3
Back Cover
End
Assembly Instructions
1
2
3
Environmental Protection
Products bearing the symbol shown below means that used electrical and electronic equipment (WEEE) should not be
mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to
designated collection points where it will be accepted free of charge.
Disposing of this product correctly will help save
valuable resources and prevent any potential negative effects on human health and the environment, which could
otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your
nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with
your national legislation.