© Copyright OYN-X® All documentation rights reserved.
45
【
PPPoE setup
】
PPPOE
Enable
：
Reverse ■ means choose, setting can become effective.
Input the user name and password that ISP
（
Internet service provider
）
provides.
After saving it, reboot up your system. Then the DVR will build a network
connection based on the PPPoE. The IP address will change into dynamic IP
address after above operation is well done.
Operation
：
After PPPoE dialing has successfully looked up the IP
address in the [IP address] and obtain the current IP address. Then use
this IP address to visit the DVR through user port.
【
NTP setup
】
NTP