Inserting an iPhone
(1)
(2)
(3)
Place your iPhone in the protective shell it came with (see page 1), and then refer to the diagram
below for more information.
(1)
Connect the iPhone’s main connector to connector (F).
(2)
Slide your iPhone toward the right of the head unit. Connector (F) will retract and tilt. Next,
press down on your iPhone until the tabs (E) are inserted into the holes on the back of the
protective shell.
(3)
Once the iPhone, with its protective shell, is pressed into the cradle (D), slide it to the left of the
head unit in order to insert the tab (C) into the jack input (headphone connector) on your iPhone.
Performing this procedure in the opposite direction removes the iPhone from the cradle.
We recommend always using the protective shell that comes with your iPhone when using the
O Car. Using it without its protective shell can damage your iPhone and make it harder for
the O Car to hold.
Handling the Cradle
The O Car’s iPhone cradle has a system that allows it to be removed by moving it 40mm. Out of
the cradle, it can be used vertically or horizontally at a 90° angle.
(I)
Press the cradle toward the body of the head unit by pressing its sides (I). The station will move
and softly release it (with a click). It can then move 40mm. You can turn it clockwise (90°) for use
in a vertical position.
Return the cradle to a horizontal position before positioning it for removal. The cradle can be
inserted into the car radio’s body only in horizontal position.
8
