OXO NetBox MS, Instruction Manual

Page: 9 / 20

User Manual - NETBOX MS V1.0 11/2019 9/20
Input from universe 000 to 255 or DMX 0A or 0B. The order is important for Priority mode but
do not change anything in HTP or LoTP mode.
>MODE : HTP / LoTP / Priority
HTP : The Highest value take precedence.
LoPT : The Lowest value take precedence.
Priority : If the first universe is available then it take precedence on the second, else if the first
is not available the second one take precedence.
>RESENT TO ARTNET : 000
You could choose here to resend into an Artnet universe the universe you just create on the
selected port from universe 000 to 255.
Be carefull, there is a limitation, you could not use the resend universe with another port.
If you choose DISABLE you will have access to the following menu :
3.4 DISABLE CONFIGURATION
>DISABLE : NO
>RECORD TO CUSTOM : NO
As soon as modify some port state in the advanced menu you could record your configuration
in your own custom preset. There is 4 customs preset available.
4 SETTINGS
>TIME BEFORE AUTOLOCK : NO AUTOLOCK
Choose if you want to autolock the Netbox MS to avoid unintentional change, only two
possibilities No Autolock or after 30s.
>DMX OUT FRAME RATE : NORMAL
By default (Normal) the Netbox MS transmit data at the same frame rate it receive it, if you
have trouble with frame rate you could force it to 40 ms. Only two possibilities Normal or
Slow.
>CONTRAST : 01
Change the contrast of the screen from 1 to 15
5 RESET / UPDATE
>RESTORE DEFAULT SETTINGS ? : NO
To restore default setting, this will erase customs preset
>UPDATE MODE : NO
To update the product, you need a TBOX G2 and a male/male XLR5 adaptor to do this using
port 01.