Thank you for purchasing this product
.
For your own safety, please read this user
manual carefully
before you initially start-up
SAFETY INSTRUCTIONS
◆
Every person involved with the installation, operation and maintenance of this device has to :
-
be
qualified
-
follow
the
instructions
of
this
manual
◆
CAUTION!
Be
careful
with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
◆
This
device
has
left
our
premises
in
absolutely
perfect
condition
.
In
order
to
maintain
this
condition
and
to ensure a safe operation, it is absolutely necessary for the user to follow the
safety instructions and
warning notes written in this user manual.
◆
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
◆
Keep
away
from
heaters
and
other
heating
sources
!
◆
If
the
device
has
been
exposed
to
drastic
temperature
fluctuation
(
e
.
g
.
after
transportation
),
do
not
switch it on immediately. The arising condensation water might damage your device. Leave
the device
switched off until it has reached room temperature.
◆
Make
sure
that
the
power
-
cord
is
never
crimped
or
damaged
by
sharp
edges
.
Check
the
device
and
the power-cord from time to time.
◆
If
the
external
flexible
cable
or cord of this luminaire is damaged, it shall be exclusively replaced
by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
◆
shields
,
lenses
or
ultraviolet
screens
shall
be
changed
if
they
have
become
visibly
damaged
to such an
extent that their effectiveness is impaired, for example by cracks or deep scratches.
◆
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
◆
Make sure that the available voltage is not higher than stated in this manual.
◆
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle
the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
◆
During the initial start-up some smoke or smell may arise. This is a normal process and does
not
necessarily mean that the device is defective.
◆
DANGER OF BURNING!
Never touch the device during the operation! The housing heats
up to the
housing temperature TSURFACE.
◆
Don
'
t switch the device on and off in short intervals as this would reduce the lamp
'
s life.
◆
HEAL TH HAZARD!
Never look directly into the light source, as sensitive persons may
suffer an
epileptic shock (especially meant for epileptics)!
◆
Always disconnect from the mains, when the device is not in user or before cleaning it.
◆
Please
note
that
damages
caused
by
manual
modifications
on
the
device
or
unauthorized
operation
byunqualified
persons
are
not
subject
to
warranty
.
◆
Keep
away
children
and amateurs from the device!
◆
There
are
no
serviceable
parts
inside
the
device
.
Maintenance
and
service
operations
are
only
to
be
carried out by authorized dealers.
Operation instructions:
◆
This system has DMX Online
mode
and
Stand-alone Mode
.
Online
mode
can
link
other
units
and
be
controlled by the DMX controller. And Stand-alone Mode has the functions
of
Sound
,
Auto
Mixcolor and Strobe
and so on..
◆
Do not receive any DMX Signal under Master/Slave mode
.
Master
:
MODE5/6/7/8
Slave
：
DMX MODE3
.
◆
If
a
DMX
signal
is
present
under
Online
mode
,
the
DMX
LED
will
blink
very
fast
to
indicate
.
While
under
Master
/
Slave
mode
,
Master
'
s
LED
indicator
will
light
and
Slave
'
s
one
will
blink
to
indicate
.
◆
Button
Function
Description
:
Press
MODE
button
to
select
your
desire
mode
.
And
press
UP
or
Down
button
to
select
DMX
address
,
switch
AUTO
MODE
,
adjust
the
speed
value
and
select
color
.
Up
key
is
to
add
value
.
Down
key
is
to
reduce
value
.
(
Note
:
If
you
press
UP
or
DOWN
key
more
than 3
seconds
,
you
can
select
quickly
.
)
D
Button name
Function description
MODE
UP
DOWN
to select your desire mode
select
dmx
address
,
run
auto
mode
adjust
mode
speed
,
select
macro
color
select
dmx
address
,
run
auto
mode
adjust
mode
speed
,
select
macro
color
USER MANUAL
