5
Copy Right © 2018 Oxidizer Pro, Inc. All Rights Reserved
INSTALLATION REQUIREMENTS
Electrical Requirements:
•
Oxidize It
™
requires 120-volt, 60 Hz power.
•
An approved GFCI outlet is recommended for supplying power to
your Oxidize It
™
.
•
Never use an extension cord, or a power adapter, other than
the one provided.
Location Requirements:
•
Never install the Oxidize It
™
in areas where water may freeze.
Oxidize It
™
will always retain some water in the unit and freezing
can cause damage to internal components.
Water Requirements:
•
Water quality may affect the performance of your Oxidize It
™
. If you
have water quality concerns such as high iron or mineral content,
consult a water filtration expert.
Prior To Installation:
•
Remove your Oxidize It
™
from its packing and inspect for any
shipping damage.
•
Turn off the hot and cold-water supply to your washing machine.
Tools you will need:
•
Phillips head screwdriver
•
Bucket or container to catch water when disconnecting hoses
Optional tools
•
Large pliers to tighten and remove hoses if needed
Note:
The manufacturer of the Oxidize It System strongly recommends that, when
you have the System installed, you replace your existing washing machine hoses
either with ozone compatible (
EPDM lined
) hoses or stainless-steel hoses, which
we can sell to you. Use of your existing washing machine hoses increases the
likelihood of leaks and decreases the effectiveness and environmental benefits of
your new Oxidize It System.
