Transmitter Receiver
Fiber Wavelength
Model Output
Model Sensitivity
Optical
Power
Budget
Max
Distance
Singlemode 1310nm
XFO-
1013TS
-5 dBm
XFO-
1013RS
-26 dBm
21 dB
30km
CAUTION!
The transmitter unit contains a laser-emitting diode located in the optical connector.
This device emits invisible infrared electromagnetic radiation that can be harmful to
human eyes. The radiation from this optical connector, if viewed closely without any
protection, may cause instantaneous damage to the retina of the eye. Direct viewing
of this LED should be avoided at all times.
INSTALLATION INSTRUCTIONS
Installation
Procedure
The
OXIC XFO-1013TRS
video transmission systems series are preset for
immediate use. There are indicator LEDs on the units for monitoring the real-time
status of video, data and power. The following instructions describe the typical
installation procedure and the function of the LED indicators located on each unit.
1.
Connect the video source (camera) to the video input BNC connector on the
transmitter unit using coaxial cable.
2. Connect the video output BNC connector on receiver unit to the video monitor using
coaxial cable.
3. Connect the fiber optic cable between the transmitter and receiver
4. Apply the power supply to both the transmitter and receiver
４
