Praktika T-05(K) speedgate
14
authorization of passage. LED indicator of button 2 on the RC panel will
turn red (Fig. 3). The speedgate is ready for operation.
8.2. Operating modes
The speedgate has several modes of operation. The desired mode is
set by using RC panel or proximity cards. Operational modes are displayed
on the panel in the form of mnemonic signs depicting authorization and
non-authorization of passage.
8.3. Control with remote contron panel
General view of the RC panel is shown in Fig. 3. Each button is
equipped with the LED indicator displaying operation of the speedgate.
The "Stop" mode
"Stop" mode is set when the speedgate is turned on. Wings are
closed. Switch from another mode to "Stop" is performed by pressing
button 2, in this case LED indicator above button 2 turns red. In this mode
the passage is non-authorized in both directions.
The single passage mode
Button 1 (3) turns on single passage mode to the left (right). This
mode allowed one pass to the left (right) with a subsequent changing to
"Stop" mode. Green arrow indicator turns on on the display showing a free
passage to the left (right). Green LED indicator on the RC panel turns on
above the button corresponding to the authorized passage and a red
