Praktika T-02(К) turnstile
16
4.4. Check the condition of the toothed belt and its tension (Fig. 8).
5. Lubrication of moving parts
Lubrication is made with 2-3 drops of engine oil (viscosity grade 5W-20).
5.1. The rotation axis of the stopper unit (Fig. 9).
5.2. The rotation axis of the roller lever (Fig. 10).
5.3. Clips between the stopper unit and the solenoid (Fig. 11). Elements
are located behind the roller lever shown on Fig. 10
5.4. The rotation axis of unlocking arms cam (Fig. 12).
5.5. The connection of lock pin and arms-unblocking cams (Fig. 13). The
operation shall be done for each arm. Hole in Fig. 13 is shown in the
conventional manner.
6.
Assembling and performance checking of the turnstile
6.1. If any troubles or defects are found out during MO it is advised
to contact our service department for advice, contact details are available
online:
www.oxgard.com
6.2. If it is necessary to repair damaged painted surfaces, powder
paint identical to the damaged (RAL9005) shall be used in accordance
with instructions for its use.
6.3. Reassemble the turnstile in reverse order.
6.4. Turn on the turnstile and perform functionality check by making
several passes and activating “antipanic” mode.
Summary of Contents for Praktika T-02
