VZR.247800.001
IM
Turnstile CUBE C-03
Installation Manual
16
Figure 8
– Appearance of the turnstile control board
– The turnstile operating modes are set using the BUT button.
To select the required turnstile mode, it is necessary:
- press and hold the BUT button until a short beep appears. The turnstile
operation mode is selected based on the number of short beeps.
- it is necessary to release the BUT button after the required number of
signals, a long beep, which indicates that the desired mode has been written into
the controller memory, will sound.
- when the power is off, the selected mode is not reset.
Button
