6
Version 1.5 rev 26 Sep
2016
Apogee Astronomy
Alta and Ascent Manual
17. Shielded I/O cables must be used when operating this equipment.
18. Pollution Degree 2. Normally only non-conductive Pollution occurs. Occasionally, however, a
temporary conductivity caused by condensation must be expected.
19. Your product is a precision scientific instrument containing fragile components. Always handle it with
care.
20. Do not wet or spill liquids on the product, and do not store or place liquids on the product.
21. If spillage occurs on the product, switch off power immediately, and wipe off with a dry, lint-free
cloth.
22. If any ingress of liquids has occurred or is suspected, unplug the mains cables, do not use, and
contact Customer Support.
23. Do not expose the product to extreme hot or cold temperatures.
24. Do not expose the product to open flames.
25. Do not allow objects to fall on the product.
26. Refer to Section 6 for Cleaning information
This symbol means that the surface it is applied to may become hot. Under normal conditions
the surface will not exceed 75°C in an ambient of 25°C. However, in a fault scenario (such as
insufficient ventilation clearance), the surface may reach over 120°C in a maximum ambient
of 25°C.
