Ver. 06.30.20
CONNECTING TWO OR MORE MODULAR UNITS
To secure 2 or more units together use both the preinstalled
CONNECTING BRACKETS found on the bottom of the base, and
the long connector bolt, washer, and lock nut included in the
hardware pack.
Lay units to be connected on their back on a clean, flat surface,
such as
provided cardboard box or blanket, to protect the
surfaces from scratches. Remove one bolt from each bracket
and loosen the other bolt to rotate bracket 90 degrees. Align
brackets with holes on base of second unit and secure with
washer & bolt.
Join the top sections of the units together by inserting the
long connector bolt through the adjoining holes of two units.
Secure tightly using a washer and locking nut. Return joined
units to their upright standing position.
NOTE: For stability and safety, is essential that all units be
secured to each other at both top and bottom locations.
Outside View
Inside View
Connector Hole
SUGGESTED CONFIGURATIONS
Receptacle Base +
Shelf Base
Receptacle Base +
Shelf Base +
Hutch, L- Stack
2 Shelf Bases +
Hutch, L- Stack
Receptacle Base + Shelf
Base + 2 Hutch Units,
Double Stack
2 Shelf Bases +
2 Hutch Units,
Double Stack
2 Receptacle Bases +
2 Hutch Units,
Double Stack
Shelf Base +
Shelf Base
Receptacle Base +
Receptacle Base
Receptacle Base +
Hutch, Single Stack
Shelf Base +
Hutch, Single Stack
