Apply wood glue provided and attach the left rocker to the left
arm assembly 2 .
Step 1
Insert front seat rail into arm assembly.
Step 4
Attach the rocker then secure it by hammering two dowels into
each join. After the glue has set for at least 30 minutes but before it
hardens, clean the excess glue from the join with a clean cloth or knife.
D
Step 2
Assembly Instructions
page 2
Franklin Rocking Chair
Step 5
4
7
2
e u l G d o o W
e u l G d o o W
4
e u l G d o o W
e u l G d o o W
On a clean flat surface, lay left arm assembly flat on the ground. With
mortise holes facing up, insert back assembly into arm assembly.
NOTE: The top of the back is marked and should be placed at the top
of the chair.
Step 3
6
6
Insert the back seat rail into arm assembly.
NOTE: The back rail is shorter than the front rail. The tenons
of both rails are angled. Position the rails so that the tenons point
to the back of the rocker.
8
8
7
A
A
A
A
A
* Apply glue in this step. (See pg.1 for instruction.)
