STEP 4
Insert the back seat rail into arm assembly.
NOTE: The back rail is shorter than the front rail. The tenons
of both rails are angled. Position the rails so that the tenons
point to the back of the rocker.
INSTRUCTIONS
STEP 1 * Apply glue in this step. (See pg.1 for instruction.)
Apply wood glue provided and attach the left rocker to
the left arm assembly .
Ver. 2019.06.03
STEP 3
On a clean flat surface, lay left arm assembly flat on the
ground. With mortise holes facing up, insert back assembly
into arm assembly.
NOTE: The top of the back is marked and should be placed
at the top of the chair.
STEP 5
Insert front seat rail into arm assembly.
STEP 6
Put seat assembly into place, keeping the leg notches to
the front of the chair, and the rounded arch to the back.
2
e u l G d o o W
e u l G d o o W
e u l G d o o W
e u l G d o o W
4
2
STEP 2
Attach the rocker by fitting the front tenon first and then
the back. Secure it by hammering two dowels into each
join. After the glue has set for at least 30 minutes but
before it hardens, clean the excess glue from the join with a
clean cloth or knife.
Fit the front
tenon first
A
A
A
6
4
6
8
8
7
7
5
5
