STEP 2
Place back seat rail into position, holes facing inward.
Insert the large rounded pegs at the back of the seat into
the back seat rail.
Ver. 2019.03.21
STEP 3
Insert the tenon of the bottom rail into the mortise
of the right arm assembly.
STEP 5
With a hammer, drive 8 dowels into the predrilled
holes as shown. NOTE: Insert the tapered end of the
dowels first. The dowels should be easily driven in flush.
If there is strong resistance, do not force the dowel.
Sand to smooth off areas around the dowel pins.
STEP 4
Insert the left leg assembly into the rest of the assem-
bled parts.Secure the bottom rail by inserting a wood
screw through the under part of each leg as shown in
figure 1 below.
STEP 6
Using a phillips head screwdriver screw the 8 total wood
screws into the predrilled holes on the underside of the
seat to attach the seat to the seat back, front rail and leg
assemblies as shown.
INSTRUCTIONS
STEP 1
On a clean flat surface, lay right leg assembly on its
side mortise holes facing up. Locate the small label on
the bottom of the seat that reads “front”. With the front
of the seat toward the front of the bench, line up and
insert the front seat rail and seat into the right leg
assembly. Insert the large rounded pegs at the front
of the seat into the front seat rail.
figure 1
B
2
4
A
B
2
3
4
5
6
5
3
1
A
A
A
A
B
B
B
B
B
B
B
B
B
6
B
1
