Step 1
NOTE: We highly recommend the use of two people for assembly
of this bench. Do not drive the dowels into place until all components
are fitted together. Stand center brace upright. Insert the left back
assembly into the holes of the center brace.
Step 3
Place (left) front seat rail into position as shown.
Step 2
Align the peg in the back of the seat support rail of the (left) seat
assembly with the hole in the back assembly.
Note: Each slat of the seat assembly overhangs the connecting
braces at each end. The slats have a greater overhang at one end.
The end with the greater overhang will be at the outside end of the
bench.
Step 4
Place (left) arm assembly onto the rails of the
back assembly and front rail.
Assembly Instructions
page 2
Essex Curved Bench - 83 ”
Step 5
Repeat Steps 1-4 for the right side of the bench. Start with the back,
followed by the right seat assembly, right front seat rail and right
arm assembly.
Step 6
Drive 24 dowels into place as shown.
4
4
3
3
5
5
6
6
2
2
A
A
A
A
A
A
A
A
