Oxbox JAYLOAM001 Installation Manual Download Page 4

STEP 12- Mount electric control box assembly to unit and fasten it with 

                original screws.

Figure 12

STEP 9-  Fasten the wires with the strap and screws provided.

STEP 11- Cover and fasten the lid with two screws provided.

STEP 10- Connect the ground wire:Low Ambient Control Box
to Outdoor Unit Control Box.

Figure 11

Figure 9

Figure 8

Outdoor Fan Motor

- Connect the Outdoor Fan Motor black wire with the grey wire 
of the ICM325-HN Module with the terminal.

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

4

Mounting control assembly

 Mounting electrical box

Figure 10

Outdoor Unit  
Control Box

Low Ambient Control Box

Summary of Contents for JAYLOAM001

Page 1: ...the unit Make sure all power to unit is turned off Disassembly by a non professional may cause abnormal operation or heating which may result in fire Before installing modifying or servicing system main electrical disconnect switch must be in the OFF position and install a lockout tag There may be more than 1 disconnect switch Always use a suitable warning label Follow all safety codes Thank you v...

Page 2: ...kout on side plate then the right hole on E part box and over to outside row of coil left side be careful not to harm tubing Figure 1 STEP 5 Bind unused wire and secure it near or next to control STEP 6 Protect sensor wire from physical damage or wind movement where necessary Note Wiring in field installed an insulated sleeve that meets local laws and regulations must be added to protect the wires...

Page 3: ... Defrost Control OFM Outdoor Fan Motor Field Installed need to use wire to connections Reversing valve is energized in the Heating mode For the Heat Pump Select Jumper setting please refer to ICM325HN Application Guide Connect the ground wire Low Ambient Control Box to Outdoor Unit Control Box Outdoor Fan Motor Outdoor Fan Motor Remove the fan black wire from the Deferost Control Board Connect the...

Page 4: ...und wire Low Ambient Control Box to Outdoor Unit Control Box Figure 11 Figure 9 Figure 8 Outdoor Fan Motor Connect the Outdoor Fan Motor black wire with the grey wire of the ICM325 HN Module with the terminal Manufacturer reserves the right to change at any time specifications and designs without notice and without obligations 4 Mounting control assembly Mounting electrical box Figure 10 Outdoor U...

Reviews: