3
Get started
3
Warning!
•
The in-wall smart plug must be installed and serviced only by qualified
electrical person.
• Do not touch the terminals of the device during the testing.
• Turn off all power supplying this equipment before installing.
• Make sure that the power supply is off before connecting or disconnecting
it to the auxiliary device.
•
Always use a properly rated voltage sensing device to confirm power is
off.
On/Off button
Reset.
Press and hold the On/Off button for ten seconds until the LED
indicator flashes three times to restore the smart plug to default factory
settings.
Identify.
Press and hold the On/Off button for three seconds until the LED
indicator flashes three times.
On/Off.
Press one time to switch On and Off.
LED status
What it means
LED keep flashing
Device has not joined a network.
Steady light
Device has joined a network.
Flashing three times
Return to Factory Settings.
Identify.
Green LED
Device is on.
Red LED
Device is off.
LED indicator
The LED status gives the following information of the smart plug:
