7
4.1 To get started, you will need:
• A Zigbee Gateway.
• A mobile phone with a mobile APP installed.
4.2 Adding to the gateway's network
1. Set your gateway to permit joining (see your gateway's
manual).
2. Power on the Water Leakage Sensor and press the reset
button once to make sure the LED indicator is flashing red (If
not, reset it to factory defaults).
3. Make sure the Water Leakage Sensor is in the range of
gateway's network. After few seconds the Water Leakage
Sensor will join the gateway automatically and the LED
indicator will flash green when it successfully joined.
Note:
If the adding is failed, simply reset the Water Leakage
Sensor and retry.
Configure Network
4
