5
4
FAQ
Q1. Can I use a Wireless Switch to control the SLC605 in-wall switch?
A1: Yes, you can use SLC602 Wireless switch to control SLC605 in-wall
switch by following the below instructions;
Step 1: Make sure the wireless switch and in-wall switch are in the same
Gateway's network.
Step 2: On the app, open the identify feature of the in-wall switch, and the
indicator on the wall switch will start flashing.
Step 3: Press the reset button of the wireless switch for 3 seconds to enter
the devices to binding mode.
Step 4: The devices will bind automatically. Once the binding is successul,
the indicator on the in-wall switch will turn steady and the indicator on the
wireless switch will flash three time in Green.
Q2: How can I use the SLC605 in-wall switch to control the brighness of
LED622 LED bulb?
Step 1: Be sure the in-wall switch and LED bulb are in the same Gateway's
network.
Step 2: On the app, open the identify feature of the LED bulb, and the bulb
will start flashing.
Step 3: Press the binding button of the in-wall switch for 3 seconds until the
LED indicator flashes three times. (You have to pull out the case for you to
find the binding button)
Step 4: The in-wall switch will automatically bind with the bulb. The bulb
will stop flashing once the binding is successfully, at the same time the LED
indicator of the in-wall switch will flash three times.
Note: in-wall switch can also be used with SLC611, SLC612 lighting drivers.
