5. Advanced User Guidebook
Setting1
…..
Setting
Setting8
The setting address
Save the current oscilloscope setting to the
internal storage
Save
Load
Recall the setting from the selected address
When the type is
Image
, the menu shows as following:
Save the current display screen. You can
also press
Copy
button to do it. The file can
be only stored in a USB storage, so a USB
storage must be connected first. The file is
stored in BMP format, named according to
the current system time.
Save
Save and Recall the Waveform
The SDS series oscilloscope can store 15 waveforms, which can be displayed
with the current waveform at the same time. The stored waveform called out can
not be adjusted.
In order to save the waveform of the channel CH1 into the address 1, the
operation steps should be followed:
1.
Saving
: Press the
H1
button
，
the
Type
menu will display at the left of screen,
turn the
M
knob to choose
Wave
for Type.
2.
Press the
H2
button and press
F1
button to select
CH1
for Source.
3.
Press the
H3
button ,and press the
F
1, turn the
M
knob to select
1
as object
address.
4.
Press the
H5
button and press
F1
button to select
Internal
.
5.
Press the
H4
button to save the waveform.
6.
Recalling
: Press the
H3
button, and press the
F
1, turn the
M
knob to select
1
as object address. Press
F2
button to set
Show
as
ON
. The waveform stored
in the address will be shown, the address number and relevant information
will be displayed at the top left of the screen.
User Manual of Smart Digital Storage Oscilloscope
50
Summary of Contents for SDS6062
Page 4: ......
