4.Advanced User Guidebook
39
A→B
,+PulseCount, -PulseCount, RiseEdgeCnt, FallEdgeCnt, Area, and
Cycle Area.
The "Automatic Measurements" menu is described as the following table:
Function Menu
Setting
Description
Add
Source
CH1 CH2
CH3 CH4
Select the source
Add
Add the selected measure types (shown at
the left bottom, you could only add 8 types at
most)
Snapshot
OFF
CH1
CH2
CH3
CH4
Hide the window of measures
Show all the measures of CH1 on the screen
Show all the measures of CH2 on the screen
Show all the measures of CH3 on the screen
Show all the measures of CH4 on the screen
Next Page
Enter next page
Remove
Meas Type
(left menu)
Press to show the left menu, turn the
M
knob
to select the type need to be deleted, press
Remove
again to remove the selected
measure type.
Remove All
Remove all the measures
Prev Page
Enter previous page
Measure
Only if the waveform channel is in the ON state, the measurement can be
performed. The automatic measurement can not be performed in the following
situation: 1) On the saved waveform. 2) On the Dual Wfm Math waveform. 3) On
the Video trigger mode.
On the Scan format, period and frequency can not be measured.
Measure the period, the frequency of the CH1, following the steps below:
1. Push the
Measure
button to show the right menu.
2. Select
CH1
in the right menu.
3. In the left Type menu, turn the
M
knob to select
Period
.
4. In the right menu, select
Add
. The period type is added.
5. In the left Type menu, turn the
M
knob to select
Frequency
.
6. In the right menu, select
Add
. The frequency type is added.
The measured value will be displayed at the bottom left of the screen
automatically (see
