6
Making Measurements
1) Plug the black test lead into
the
COM
jack and the red test
lead into the
INPUT
Jack.
2) Set the rotary switch to V
position to make the meter get
into DC V range.
3) Connect the test leads to the
voltage source or load
terminals for measurement.
4) Take the reading on the LCD.
When DC voltage measurement has been completed,
disconnect the connection between the testing leads and the
circuit under test and remove testing leads from the input
terminals.
Measuring AC Voltage
WARNING
Beware of Electrocution
Pay special attention to avoid electric shock when
measuring high voltage. Do not input the voltage which
more than 600V rms AC.
1) Plug the black test lead into
the
COM
jack and the red
test lead into the
INPUT
Jack.
2) Set the rotary switch to V~
position to make the meter
get into AC V range.
3) Connect the test leads to
the voltage source or load
terminals for measurement.
4) Take the reading on the LCD.
When AC voltage measurement has been completed, disconnect
the connection between the testing leads and the circuit under test
