Owon 4-CH VDS6000 Series, User Manual

Page: 59 / 64

５９
VIII. Technical Specifications
i. Set the probe compensation at x10 for physical probe;
ii. Under suitable operation temperature, work the device for 30+ minutes without interval;
iii. Provided the environment temperature gets 5 degrees more, or less, to self-calibrate the device
through Utility menu, via
“Self Cal” option (please refer to
Self Cal ).
The following technical specifications been measured on the basis of above-mentioned operations,
Oscilloscope Part -
Bandwidth
VDS6074 70MHz
VDS6104 100MHz
VDS6074A
8-bit mode 70 MHz
12-bit mode 70 MHz
14-bit mode 20 MHz
VDS6104A
8-bit mode 100 MHz
12-bit mode 100 MHz
14-bit mode 20 MHz
Vertical Resolution (A/D)
VDS6104 8 bits
VDS6104A 8 bits / 12 bits / 14 bits
Channel Q'nty 4
Acquisition
Mode sample, peak detect, average
Sampling Rate
VDS6074
VDS6104
4-CH working 250 MSa/s
2-CH working 500 MSa/s
1-CH working 1 GSa/s
VDS6074A
VDS6104A
4-CH working
8-bit mode 250 MSa/s
12-bit mode 125 MSa/s
14-bit mode 125 MSa/s
2-CH working
8-bit mode 500 MSa/s
12-bit mode 250 MSa/s
14-bit mode 125 MSa/s
1-CH working
8-bit mode 1 GSa/s
12-bit mode 500 MSa/s
14-bit mode 125 MSa/s
Input
Input Coupling DC, AC, ground
Input Impedance
1 MΩ ± 2%, in parallel with 15 pF ± 5 pF
Supported Probe x1, x10, x100, x1000
Max Input Voltage 40V (DC + AC Peak)
Bandwidth Limit 20MHz, or fullband