OwlTech MW450 Installation Manual Download Page 6

Page: 6 / 9

Step 3

Step 5

Modify to fixed IP address, IP address can be self-defined, each microwave IP address must be different and in the

same network segment, it is recommended not to be in the same network segment with those network routers,

device will restart after modification, login again.

Step 4

Set up device name and password, as well as microwave frequency band.

Set up AP+WDS

1. Modify SSID name, set up in according to installation location and other information to facilitate future maintenance.

Each device needs to be set to a different name. Suggested name: p lo IP address information.

Note: settings 2, 3, 5 are the same as the settings of corresponding MW450R

http://www.owltechcctv.com

-6-

Summary of Contents for MW450

Page 4: ...oose set up the band in according to the frequency band environment analysis 1 band interval with existing bands is suggested 5 Modify the encrypted password Note remember the settings for 2 3 4 and 5 are the same to corresponding MW450R and MW450T Step 5 Set up AP WDS ...

Page 7: ...ce to pair with the MAC address of MW450T max up to 4 MW450T Step 2 Enter MW450T setup interface to pair with the MAC address of MW450R note that only 1 MW450R Check the signal connection strength of MW450T and MW450R this parameter can be used as reference for angle adjustment during installation ...

Page 8: ...be above DC12V 2A Pin 1 2 3 6 4 5 7 8 Wire Color White Orange Orange White Green Green Blue White Blue White Brown Brown Signal RX RX TX TX DC6 24V DC6 24V GND GND MW450R T MW450R T POE Switch Method 1 connected to POE switch directly 1 2 3 6 4 5 7 8 DC6V 24V GND http www owltechcctv com 8 Switch Not POE ...

Page 9: ...50 at the same time power need to be above DC12V 4A MW450T MW450R POE Switch Pin 1 2 3 6 4 5 7 8 Wire Color White Orange Orange White Green Green Blue White Blue White Brown Brown Signal RX RX TX TX DC6 24V DC6 24V GND GND MW450T MW450R 1 2 3 6 4 5 7 8 DC6V 24V 4 5 7 8 GND http www owltechcctv com 9 ...