7
OPERATION
Remaining charge: 80 - 100%
Remaining charge: 40 - 80%
Remaining charge: 20 - 40%
Remaining charge: Less than 20%
INSUFFICIENT BATTERY POWER
If battery power is insufficient for operation, the unit will beep and then power off.
BATTERY STATUS
PERM
---------------------
ONU:
1310nm
OLT:
VDO:
1490nm
1550nm
LO
LO
LO
The PON-2M is powered by (3) AA batteries, but can also operate on wall power
when using an approved AC/DC power transformer with the following electrical
specifications:
When unit is plugged into a wall outlet via a power transformer and
charging the batteries:
the charger icon will appear;
the battery indicator on the display will begin to scroll; and
the battery charger LED will be lit (found on the right side of the unit)
BATTERY CHARGING PRECAUTIONS AND RECOMMENDATIONS
Do
NOT
charge the unit while non-rechargeable batteries are installed. This could cause an unsafe condition that could
damage the unit and void the product warranty.
Re-chargeable batteries
MUST
be installed in unit when power transformer is plugged into wall power.
When using re-chargeable batteries, it is recommended to
NOT
charge the device for more than 12 hours at a time.
For maximum battery life of re-chargable batteries (especially NiCd and NiMH), it is recommended to charge the batteries
when the battery indicator shows 20% or less battery life.
USB
State
9V
1A
BATTERY CHARGING
PERM
---------------------
ONU:
1310nm
OLT:
VDO:
1490nm
1550nm
LO
LO
LO
9V 1A
