2.0 FUNCTIONAL DESCRIPTIONS
4.
Single-fiber Port Indicator LED
- This LED will either be
RED
or
depending upon which wavelength is selected.
GREEN
11.
8
/ AUTO
button - Pressing this button will toggle the unit between wavelengths in the selected port
when there are two wavelengths in the same port. Holding this button will place the source into AUTO mode,
where the source automatically switches wavelengths for automatic dual-wavelength testing.
8.
Next channel button
- switches the source to the next
channel.
2.0.1 CONNECTIONS
9.
Previous channel button
- switches the source to the
previous channel.
1.
Single-fiber Port
- Enables single-fiber testing.
6.
12-fiber MPO Port B Indicator LED
- This LED will either
be
or
depending upon which wavelength is selected.
RED
GREEN
10.
Power button
- Power the unit on or off.
7.
Wavelength/channel display
- briefly shows the currently
selected output wavelength, AUTO mode, and currently selected
channel. Channel 1-12 refer to the MPO channels, and channel 13
refers to the single-fiber port.
2.0.3 BUTTONS
3.
12-fiber MPO Port
- 12-fiber MPO test port.
2.0.2 INDICATOR LEDS
2.
USB Charger Port
-
Allows for charging internal Lithium
Polymer battery.
5.
Charger Indicator LED
- indicates the status of the
charger port.
- 3 -
Figure 1 - MPO Series
Fiber Optic Light Source
1
2
3
4
6
5
7
8
9
10
11