4
© 2 Save Energy Limited 2013
PART NO. CMR180i
MADE IN CHINA
STEP TWO - Pair Transmitter to the Network OWL
Ensure the Transmitter is next to the Network OWL.
•
Unplug the power connector from the Network OWL for 2
•
seconds and then plug it back in.
The green LED will flash rapidly. After about 30 seconds
•
the blue LED will start a steady flash indicating that it is in
Pairing Mode.
Press the small “Check” button in the Transmitter battery
•
compartment until the red LED on the front starts flashing.
The Transmitter is now in Pairing / Check Mode and the red
•
LED on the front will start flashing every 2 seconds (for 30
seconds).
The pairing process will now take place and the blue LED
•
on the Network OWL will start flashing a fraction of a sec-
ond after the red LED flashes on the Transmitter.
When the Transmitter Check Mode finishes, if the pairing
•
was successful, the blue LED will flash every time it re-
ceives data from the Transmitter (every 12 to 60 seconds).
Replace battery compartment cover.
•
PRESS
CHECK BUTTON
