Filename: MC4-A, MC4-BT, MC4-D MANUAL
OCT 2020
Page 5 of 6
MODEL
MC4-A
MC4-BT
MC4-D
Input types
Front Face Plate
3.5mm stereo Jack
–
2 each
3.5mm stereo Jack
–
2 each
3.5mm stereo Jack
–
2 each
Input # 1
3.5mm stereo Jack
3.5mm stereo Jack
3.5mm stereo Jack
Input # 2
3.5mm stereo Jack
3.5mm stereo Jack
3.5mm stereo Jack
Input # 3
Balanced (Mic/Line selectable)
Balanced (Mic/Line selectable)
Balanced (Mic/Line selectable)
Input # 4
Balanced (Mic/Line selectable)
Optical Toslink
Optical Toslink
Other input
NA
Bluetooth
NA
A convenient Mic and Line switch (
J
) is accessible from the rear allowing Channel 3 to be assigned to either Line or Mic
level input. Line is to the right and Mic is to the left.
The Main Audio Outputs
a) Unbalanced output
(
K
)
is a 3.5 mini jack output which has volume control (
K1
) for the main level
b) balanced output
(
L
)
is a green Euro Style output which has a volume control (
L1
) for its main level
c) Cat 5 output
(
M
)
is a RJ45 Jack which has a volume control (
M1
) for its own main level
The RJ45 connector allows for a quick hook up for Output and power are all hooked up with a single 8 pin connector.
Looking at the RJ45 from the left is pins
–
Four (4) trim controls (
1
) for the front panel slide controls.
MC4-BT Bluetooth Setup, Connection, and Pairing
–
Bluetooth SETUP to your device:
1) Push and hold pairing button (E1) for 3 seconds to wake up the Bluetooth module. The light will start flashing
2) Push/Tap the pairing button (E1) once again quickly
– now the module is in paring mode (fast blinks)
3) Use your device to search for (OWI MC4) and connect.
4) There is no code to pair to the unit
Re-connect the device to the MC4-BT:
1) Push and hold pairing button (E1) for 3 seconds to wake up the Bluetooth module
2) search for (OWI MC4) on your device and connect.
Priority Override features
–
Priority override selector for 3.5 mini on #1 or Bluetooth (G)
This will allow either the Bluetooth or the 3.5 Minijack to have priority over the input.
If you want Bluetooth to have Priority, Slide the slider to the BT selection and it will have priority over the 3.5 mini jack.
If you want the 3.5 minijack to have priority over the Bluetooth slide the slider switch down to the Input # 1 position.
Once you have chosen the priority adjust the Priority override sensitivity control (G1)
Please note that the Bluetooth signal must be turned up the entire way to send enough signal to trigger the override
module.
Hotel Bluetooth Priority Override Feature
3.5 Mini Jack or Bluetooth Priority Override feature
Choose between the 3.5 Mini Jack or the Bluetooth
