OWI User Manual: Model AMP-BT-602-1 Speaker Amplifier
OWI INC. 11 www.owi-inc.com
BLUETOOTH OPERATION
Discovery
When the speaker amp is first turned ON, the Red LED light will turn ON and the speaker amp should
be discoverable by a Bluetooth enabled device such as a PC, tablet, IPhone or other smartphone.
Open the device Bluetooth manager and review its list of discoverable Bluetooth devices. The speaker
amp will appear as OWI-XXXX where XXXX is the last 4 digits of the speaker amp MAC address. Note:
The speaker amp MAC address is identified on a label located on the speaker amp board.
Pairing
Select the OWI-XXXX Bluetooth device from the list and the device will pair with the speaker amp.
Note: If the speaker amp is password protected, you will be required to enter the correct PIN before the
pairing process will begin. If the PIN has not been changed on the speaker amp, entering 1234 will
begin the pairing process.
Operation
Once the speaker amp is paired with the device, audio from the device should pass through and be heard from
the speaker(s) connected to the speaker amp.
Reset Bluetooth settings
It is possible to reset all Bluetooth settings including the Bluetooth PIN to the factory default values.
Turn the power OFF to the speaker amp.
Locate the 5pin header on the speaker amp board.
Plug in the reset receptacle onto the header.
Turn the power ON to the speaker amp.
Wait 10secs
View the newly generated PIN listed on your device ‘PIN XXXX’ where XXXX is the new PIN. Note:
every time the reset receptacle is installed onto the 5pin header, a new PIN will be generated.
Write down the PIN and keep in a safe place.
Turn the power OFF to the speaker amp.
Remove the reset receptacle from the 5pin header.
All Bluetooth settings including the PIN have been reset to the factory settings.
