08
INSTALLATION
2.2 INSTALLING THE CARD IN A HOST COMPUTER OR PCIE ENCLOSURE
Please follow the steps below to install the Accelsior 1M2 PCIe SSD into a host computer or enclosure with a
compatible PCIe slot. Note: this card is susceptible to invisible damage if not protected during installation. For
proper grounding, we recommend using a grounding strap. Work in a clean, static-free area, and avoid wearing
clothing that retains static charges. Please visit this URL for more information:
www.owc.com/anti-static
SECTION 2.3 - DRIVE GUIDE (OPTIONAL)
If you purchased the Accelsior 1M2 with an SSD pre-installed, the OWC Drive Guide has been included to
assist you with formatting the drive. Please follow the steps below. For additional formatting and Drive Guide
information, please visit:
www.owc.com/format
.
1. Boot the host computer, connecting the PCIe enclosure at the Desktop, if applicable.
2. The drive will appear in the system as “OWC SETUP”. Double-click the icon to view its contents.
3. Open the “OWC Drive Guide” application.
4. Follow the simple on-screen prompts to complete the formatting process.
5. Once the formatting is finished the SSD is ready to use.
If you have any concerns please contact our Support Team for assistance (Section 3.2).
1. Disconnect all power and powered devices from your
desktop computer or PCIe expansion chassis, then open
the case so that the compatible PCIe slot is visible and
accessible.
2. Align the PCIe connector on the Accelsior 1M2 with the
compatible slot then carefully seat the card into the slot as
shown at right. If there is resistance, do not force the card
into the slot. Remove it, re-align the card’s connector and
try again.
3. Once the card is fully seated affix the included screw to the
bracket as shown. Notes: a) no auxiliary power connectors
or other attachments are required to use this SSD; b) Some
computers and PCIe chassis may use a plate with spring-
loaded screws or other method to secure PCIe cards;
please follow the manufacturer’s recommended method.
x8
x16
x1
x4
3
