6
SECTION 2
Warranty
General safety rules
Description and technical data
Intended and Unintended Use
Residual risks
WARRANTY
The warranty terms and conditions, which are listed in full in the purchase contract,
are valid only if the device is used in the conditions envisaged for the intended use.
Except for the operations described in the section labelled MAINTENANCE and
carried out according to the procedures indicated, any repair or modification made to
SEGNO by the user or by unauthorized companies will void the warranty.
The warranty does not extend to damage caused by inexperience or negligence in
the use of the device, or by poor maintenance, or omission thereof.
The warranty is valid subject to the following terms and conditions:
1
For a period of 12 months from the date of purchase.
2
Replacement may be made, at the company’s discretion, only after detailed
check and incorrect assembly/operation is found.
3
Costs of transport and/or shipment for the repair or replacement of the device
shall in all cases be at the purchaser’s expense
4
During the warranty period, any products replaced become the property of the ma-
nufacturer.
5
The only beneficiary of the warranty is the purchaser who has complied with the
instructions given in the manual.
6
Company’s liability ceases when the buyer assigns ownership of the product or
modifications have been made to same.
7
The warranty does not include damage resulting from excessive stress, such as
the use of the product after discovering a fault, the use of improper operating
methods, or failure to observe the instructions for use and maintenance.
8
The company accepts no liability for any difficulties that may arise in the resale
or use abroad due to the applicable provisions in the country where the product
was sold.
9
The defective product will not be replaced without proof of purchase (invoice,
copy of payment transaction).
