Owandy Radiology Ow-RX, User Manual

Page: 66 / 74

USER MANUAL
Error messages on the display
Ow-RX
(Rev. 6)
60
9.2 Fatal errors during X-ray emission
Any abnormalities during the X-ray beam always stop the emission.
The presence or absence of the acoustic signal depends on the moment
in which the problem occurred and on the success of the procedure for
stopping the rays.
These errors cannot always be removed without turning off the device
and in most cases indicate situations of system faults or deterioration
that require the intervention of technical assistance.
Displayed
message
Type of ABNORMALITY
ACOUSTIC
signal
E04
No emission None
E06
Activation of the back-up timer None
E07
Protection intervention None
E50
Spurious CPU reset None
WARNING:
If an error message appears and the buzzer sounds, always turn off
the system. In any case, the intervention of the back up timer
always stops X-ray emission.