Owandy Radiology i-max touch 3D, User Manual

Page: 108 / 119

User Manual
–Maintenance
NIMXEN020I
Owandy Radiology SAS
98
16. MAINTENANCE
Note
Maintenance and inspection procedure must be performed without patient positioned
in the equipment.
This unit, like all other electrical appliances, must be used correctly and also serviced and
controlled at regular intervals. This precaution ensures safe and efficient performance.
Regular maintenance consists of checks performed by the operator and/or by a qualified
technician.
The operator can control the following items:
Frequency Type of check Method
Daily Functioning of the indicator lights Visual inspection
Daily Check that the cables do not show signs of
breaking or wear Visual inspection
Daily Check that the unit is not damaged externally in
such a way that the safety of protection from
radiation is compromised Visual inspection
Daily Check that there are no traces of oil on the tube-
head Visual inspection
Daily Check that arm movement is smooth Practical inspection
Monthly Integrity of equipment and labels Visual inspection
Every 6 Months QC test refer to paragraph 8.5
Warning
If the operator detects irregularities or failures, he must immediately call Technical
Service.
Besides the above controls, the Service Engineer will also check the following during preventive
maintenance:
Frequency Type of check
Annually Correct equipment centring
Annually Check technical factors
Annually Perform sensor calibration
Annually Check that the fixing screws are tightened