4. HOW TO REPLACE THE BRUSH ROLL
Page 8
To check if the brush roll needs to be changed, slide cardboard across the bottom plate while
turning the brush roll. If the brushes do not touch the cardboard, it is time to change the
brush roll.
Always follow these procedures to verify or replace the brush roll in order to avoid
damaging the carpet beater.
STEP 1
STEP 2
STEP 3
1-Disconnect the wand from the
electric carpet beater (powerhead).
2-Turn the electric carpet beater
(powerhead) so that the bottom is
facing you.
3-Remove the 7 screws as illustrated
above.
Turn the electric carpet beater
(powerhead) so that the top part is
facing you and lift the cover (B) to
remove it.
To remove the brush roll cover,
remove the screws as illustrated
above and lift the cover to remove it.
Do not remove the 3
screws in a triangle
formation as these hold
the motor in place
Unscrew the
powerhead cover
Remove the powerhead
cover
Remove the brush roll
cover
